Epoxy quick stick OTTIMO – epoxy repair putty for tiles, porcelain stoneware and concrete
In tiling, it can be used to fill large defects in ceramic and porcelain stoneware tiles before the final repair with a coloured repair kit.
Kit available here
Fast-curing repair putty for concrete, ceramic, porcelain stoneware, stone, brick and similar surfaces.
It can be used to set wall plugs, reduce oversized mounting holes and reinforce pins, nails and anchors, both indoors and outdoors.
Thanks to its properties, it is useful both in construction and at home.
Key features
- Fast-curing
- Ceramic filler
- Once cured, it can be worked further (drilling, sanding, milling)
- Suitable for indoor and outdoor use
- Open time of the mixed putty is 4-7 minutes
- Reaches full strength after 24 hours
- Temperature resistance / short-term: -35°C to +120°C / +150°C
- Apply at temperatures above 8°C
The product can also be used in the construction industry, decorating, model making and repairs of stucco, monuments, gravestones, etc.
Directions for use
- Cut: Using a knife, cut off the amount of putty needed for the repair and remove the film. Seal the rest of the putty tightly in the packaging.
- Knead: Knead the product between your fingers until it is uniform. As you knead, the components combine, a reaction takes place and the putty starts to set.
- Apply: Apply directly to the area being repaired. Within a few minutes to a quarter of an hour of mixing (depending on the variant), the putty starts to harden and loses its workability. It reaches full strength after 24 hours and can then be worked further.
Safety information
ES 503 OTTIMO EPOXY QUICK STICK – Concrete: Aquatic Chronic 3: H412 – Harmful to aquatic life with long lasting effects. Skin Sens. 1: H317 – May cause an allergic skin reaction. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection. P302+P350 IF ON SKIN: Gently wash with plenty of soap and water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. EUH205 Contains epoxy constituents. May produce an allergic reaction. Contains Poli [oksy (metyl-1,2-etanodiyl)], α-hydro-ω-hydroksy-, eter z 2,2-bis (hydroksymetylo) -1,3-propanodiol (4: 1), 2-hydroksy-3 – eter merkaptopropylowy. EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. Max. VOC content: 0 g/L (20 ºC) 
